Table printing
TDC-15W
Rubber White Paste
TDC-15W is a homogeneous, white paste suitable for table printing applications. It provides a soft, elastic finish with good white coverage, delivering consistent results in table printing.
TDC-15W
Rubber White Paste
Highlights
Performance
- Does not dry during printing or block the screen when used as recommended.
- Provides an elastic, soft, feel-less texture with excellent coverage.
- Offers good wash fastness.
- Rubbing and washing tests should be conducted at least 24 hours after curing.
Printing tips
In use
- All water-based pastes can be coloured with this product.
- Can be mixed with TDC-15C in any ratio.
Technical data
TDC-15W specifications
Product typeWater-based screen printing paste
Screen mesh40T – 54T
Squeegee55–60 Shore, U-type blade
Cure temperature160°C (320°F) for 1 minute
Clean-upWater and sponge
Shipping & storage25–35°C (77–95°F)
Shelf life6 months in unopened, sealed containers
Packaging25 kg buckets, 30 kg & 60 kg drums
Precautions. Stir well before use. Do not add any unapproved additives. Clean the screen with
water and a sponge immediately after use. Store in a cool, dry place away from direct sunlight and keep the
container tightly closed after each use.
Compliance & safety. Complies with international ecological and environmental standards ·
Classified per CLP Regulation 1272/2008/EC · For industrial use only (mild skin irritant, severe eye irritant).
Refer to the Safety Data Sheet for full hazard information. The technical information above is guidance for
application only and is not a warranty for other uses.
Related products
Also in the range
TDC-15C
Clear Paste
Water-based clear paste for a soft, elastic touch — transparent or coloured with up to 5% pigment.
TDC-25W
Rubber White Paste
White paste for table printing with an elastic, smooth finish and enhanced white coverage.
TDC-25C
Clear Paste
Transparent paste with a clear, elastic finish and improved clarity for pigment dispersion.